Fitting a compensator. Coned compensator.
INSTALLING ON A STANDARD BUSHING STYLE BARREL
Pending
 Price of compensator desired
40
 Thread standard barrel
20
 Match fit of cone (optional). Standard fit will have a few thousands play (no charge).
30
 Angle slide and set comp gap
30
 Size up comp to match slide sides and top
15
 Align ream comp to bore
40
 Machine slide for full shoulder reverse plug. Machining for flanged plug is $30.
25
 Reverse plug
25
 Drilled one piece guide rod.
10
 Fit proper recoil spring (optional).
20
 For stainless steel comp (optional).
10
 For cold blueing matte finished (optional).
30
 For hot blueing (optional).
   
   
INSTALLING ON A FACTORY BULL BARREL
Pending
 Price of compensator desired.
60
 Thread bull barrel with shoulder.
50
 Angle slide, set comp gap and blend cone to barrel.
30
 Contour comp to slide sides and top.
20
 Match fit of cone (optional). No charge for standard fit which will have a few thousands play.
15
 Align bore comp to bore.
10
 Cold blue comp with matte finish (optional).
30
 Hot blue comp (optional).
20
 Stainless steel comp (optional).
   
   
   
Include magazine for test firing. Shipping and insurance is extra (specify how much insurance you want).
Shipping must be by FedEx Overnight airmail. Dealers can ship by USPS Registered Priority mail. PA orders, add
6% sales tax.
FITTING A CONED COMPENSATOR
THE FOLLOWING INFORMATION IS FOR INSTALLING ONE OF OUR COMPS.
The barrel bushing will be removed and replaced by the cone of the comp.
Bull barrel will be machined down and threaded .575x40 for about 1 inch so that
the compensator can be screwed on to it. The comp will have a shorter cone and
will be blended into the contour of the barrel.